Radiator trial fitting

Had to do a couple of small tasks first. Small tasks end up taking a bit of time and also got to talk a bit about the car to the building caretaker. But in the end, besides talking, I attached the braided hoses on the rear brakes and to the pipes and put some ptfc tape on the oil pressure sensor (for the brake lights).

The big task was holding the radiator in place and trial fitting the nose cone to see if all was OK. It took some time and several tries, since there is not that much space under there. The car looks wonderful with the nose cone attached.

Stored the nose cone again. The radiator is in place held by 2 clamps. I'll drill for that later.